IP KVM over IP for PC with dual monitor

Hello John,

Thank you for reaching out on our HelpCenter.

We are not aware of a single-computer KVM over IP that supports dual video.

You can go about accomplishing this in two different ways:
1) Use a Dominion KX III switch using two dongles (1x dongle connected to the computer's video+USB ports; 1x dongle connected to the computer's 2nd video port), each dongle connected to a port on the back of the switch. You then create a port-group in the Dominion KX III so when you open the primary port, both ports connect and the two client windows on your remote computer act as dual monitor.

2) Connect 2x Dominion KX IV-101 to the computer (1x connected to the computer's video+USB ports; 1x connected to the computer's 2nd video port). Then use Dominion KX IV User Station as your remote client (instead of using a remote computer) with two monitors connected to it.

Hope this helps!
We welcome your questions - please come back and ask us anything, anytime. You may also give us a call at 1-800-636-3434 for further clarifications on this thread.

Important note: To continue this discussion - please respond via KVMGalore HelpCenter thread, NOT via e-mail.